The Peninsula · San Mateo County
Dustless Blasting & Concrete Polishing in San Bruno, CA
We strip paint, rust and coatings from concrete, wood, brick and metal and grind and polish concrete floors across San Bruno — about 15 miles from our Treasure Island yard. Free estimates, most priced by phone the same day.
- County
- San Mateo County
- From our yard
- ~15 miles
- Population
- ~43,000
- Scheduling
- Typically 2–3 days out
Blasting & concrete work in San Bruno
The Shops at Tanforan and airport-adjacent commercial, 1940s–60s homes with concrete patios and garages.
Those are the jobs we see most in San Bruno: stripping failed paint and coatings before a new finish, blasting rust off steel so it can be coated, cleaning graffiti off block and concrete, and grinding or polishing concrete floors. Every job starts with identifying the coating and what's under it, then a test patch so you see the result before we commit.
What we do in San Bruno
- Dustless Blasting — Wet abrasive blasting that strips paint, rust and coatings with up to 92% less dust than dry sandblasting.
- Paint Removal — Strip layers of paint from concrete, steel, brick and wood without chemicals or grinding.
- Rust & Metal Blasting — Blast steel to a clean, coatable profile — trailers, tanks, beams, equipment and more.
- Concrete Polishing — Diamond-ground, densified and polished concrete floors from matte to high gloss.
- Concrete Grinding & Grind & Seal — Flatten, clean and seal concrete floors from $2/sq ft — the practical alternative to full polish.
- Surface Preparation — Blast or grind to the exact profile your coating spec requires.
- Prep for Powder Coating — Strip and profile metal parts, frames and railings before they go to the powder coater.
- Graffiti Removal — Remove graffiti from concrete, block, brick and metal without leaving a ghost.
- Line & Stripe Removal — Erase parking stripes, lane lines and floor markings from asphalt and concrete.
- Wood Restoration — Strip finishes from decks, beams, log homes and siding — when the wood can take it.
- Masonry & Brick Cleaning — Clean and strip brick, block and stone — carefully.
- Lead Paint Removal — Containment and capture when the coating tests positive for lead.
Why San Bruno property owners call us
- Self-contained rigs: our own air, water and power — we just need parking
- Blasting from $3/sq ft, grind & seal from $2/sq ft, $2,500 per crew day
- Free estimates; on-site visit usually within 24 hours
- General liability, workers' comp, commercial auto and bonding
- No deposit on most jobs; commercial clients on net 30
- 1–2 year warranty on polished and sealed concrete floors
San Bruno FAQs
Do you serve San Bruno?
Yes. San Bruno is about 15 miles from our Treasure Island yard, well inside our standard 70-mile service area. Scheduling is typically 2–3 days out.
What does blasting cost in San Bruno?
Blasting starts at $3 per square foot and concrete grind & seal at $2 per square foot; larger projects run $2,500 per crew day. Most San Bruno projects are quoted over the phone the same day.
What surfaces can you work on in San Bruno?
Concrete, wood, brick and masonry, and metal. We choose the abrasive and pressure for each surface and test a small patch first.
Do I need to provide water or power?
No. Our rigs are self-contained — compressed air, water and power ride on the truck. In San Bruno, all we usually need is parking near the work.
Are you insured for commercial work in San Bruno?
Yes — general liability, workers' compensation, commercial auto and bonding. Certificates on request; commercial clients are set up on net 30.
Nearby cities we serve
- Pacifica ~16 mi
- Millbrae ~17 mi
- Burlingame ~19 mi
- San Mateo ~22 mi
- Foster City ~24 mi
- Belmont ~25 mi
- San Carlos ~27 mi
- Redwood City ~29 mi
- All of The Peninsula →
San Bruno on the map
Free estimate · No deposit on most jobs
Instant quote in San Bruno.
Tell us the surface, the square footage and what's on it — most projects we can price the same day. Open 7 days, 6 AM to 8 PM.
- Most projects quoted by phone the same day
- On-site visit usually within 24 hours
- Scheduling typically 2–3 days out
- Commercial clients on net 30