The Peninsula · Santa Clara County
Dustless Blasting & Concrete Polishing in Palo Alto, CA
We strip paint, rust and coatings from concrete, wood, brick and metal and grind and polish concrete floors across Palo Alto — about 35 miles from our Treasure Island yard. Free estimates, most priced by phone the same day.
- County
- Santa Clara County
- From our yard
- ~35 miles
- Population
- ~68,000
- Scheduling
- Typically 2–3 days out
Blasting & concrete work in Palo Alto
University Avenue retail, Stanford Research Park labs, Eichler homes with concrete slabs and radiant floors.
Those are the jobs we see most in Palo Alto: stripping failed paint and coatings before a new finish, blasting rust off steel so it can be coated, cleaning graffiti off block and concrete, and grinding or polishing concrete floors. Every job starts with identifying the coating and what's under it, then a test patch so you see the result before we commit.
What we do in Palo Alto
- Dustless Blasting — Wet abrasive blasting that strips paint, rust and coatings with up to 92% less dust than dry sandblasting.
- Paint Removal — Strip layers of paint from concrete, steel, brick and wood without chemicals or grinding.
- Rust & Metal Blasting — Blast steel to a clean, coatable profile — trailers, tanks, beams, equipment and more.
- Concrete Polishing — Diamond-ground, densified and polished concrete floors from matte to high gloss.
- Concrete Grinding & Grind & Seal — Flatten, clean and seal concrete floors from $2/sq ft — the practical alternative to full polish.
- Surface Preparation — Blast or grind to the exact profile your coating spec requires.
- Prep for Powder Coating — Strip and profile metal parts, frames and railings before they go to the powder coater.
- Graffiti Removal — Remove graffiti from concrete, block, brick and metal without leaving a ghost.
- Line & Stripe Removal — Erase parking stripes, lane lines and floor markings from asphalt and concrete.
- Wood Restoration — Strip finishes from decks, beams, log homes and siding — when the wood can take it.
- Masonry & Brick Cleaning — Clean and strip brick, block and stone — carefully.
- Lead Paint Removal — Containment and capture when the coating tests positive for lead.
Why Palo Alto property owners call us
- Self-contained rigs: our own air, water and power — we just need parking
- Blasting from $3/sq ft, grind & seal from $2/sq ft, $2,500 per crew day
- Free estimates; on-site visit usually within 24 hours
- General liability, workers' comp, commercial auto and bonding
- No deposit on most jobs; commercial clients on net 30
- 1–2 year warranty on polished and sealed concrete floors
Palo Alto FAQs
Do you serve Palo Alto?
Yes. Palo Alto is about 35 miles from our Treasure Island yard, well inside our standard 70-mile service area. Scheduling is typically 2–3 days out.
What does blasting cost in Palo Alto?
Blasting starts at $3 per square foot and concrete grind & seal at $2 per square foot; larger projects run $2,500 per crew day. Most Palo Alto projects are quoted over the phone the same day.
What surfaces can you work on in Palo Alto?
Concrete, wood, brick and masonry, and metal. We choose the abrasive and pressure for each surface and test a small patch first.
Do I need to provide water or power?
No. Our rigs are self-contained — compressed air, water and power ride on the truck. In Palo Alto, all we usually need is parking near the work.
Are you insured for commercial work in Palo Alto?
Yes — general liability, workers' compensation, commercial auto and bonding. Certificates on request; commercial clients are set up on net 30.
Nearby cities we serve
- Menlo Park ~33 mi
- Half Moon Bay ~31 mi
- Redwood City ~29 mi
- San Carlos ~27 mi
- Belmont ~25 mi
- Foster City ~24 mi
- San Mateo ~22 mi
- Burlingame ~19 mi
- All of The Peninsula →
Palo Alto on the map
Free estimate · No deposit on most jobs
Instant quote in Palo Alto.
Tell us the surface, the square footage and what's on it — most projects we can price the same day. Open 7 days, 6 AM to 8 PM.
- Most projects quoted by phone the same day
- On-site visit usually within 24 hours
- Scheduling typically 2–3 days out
- Commercial clients on net 30